Scanning Pros
Scanning Pros › Turbo Engineering Systems 3D Viewer

Turbo Engineering Systems 3D Viewer Spin a part. See what your .stl really is.

Turn the sample part with your mouse or finger, then switch to the rough scan of the same part and see the difference. Or open your own .stl: it stays on your computer.

Drag to turn. Scroll or pinch to zoom. Right-drag, or two fingers, to slide. You can also drop an .stl onto the picture.

Loading the viewer...

What the two samples show

Both samples are the same made-up bracket, drawn for this page. It is not anybody's job.

  • Clean solid model. A .step (Solid Model) saved as an .stl. Press "Show the triangles": a few big ones cover each flat face, the holes are round, and the mesh is closed.
  • Rough scan of it. What a 3D scanner hands over. Thousands of small triangles, a bumpy skin, a worn corner, and patches the scanner missed, which show up as open edges.

Turning the second into the first is reverse engineering, and it is what we do. For the difference between the two kinds of file, see .step, .stl or a drawing?

Want to make a part of your own? Our simple CAD page builds one from boxes, cylinders and holes and saves it as an .stl you can open here.

Have a part like the rough one?

If your scan or your worn part needs to become a clean file you can machine or print from, ask us a question or email a photo to lee@scanningpros.com.

We keep a record of each use of this viewer: the time, the internet address it came from, and the name and size of any file opened. The file itself never leaves your computer.

Questions people ask

Is my file uploaded when I open it here?

No. The file is opened by your own browser and stays on your computer. We record that the viewer was used, with the time, your internet address and the name and size of the file, but not the file.

Why does my scanned .stl show open edges?

A 3D scanner cannot see every surface, so a raw scan has gaps, and its skin is bumpy. Open edges are those gaps. For a part that has to fit, the scan is rebuilt as a clean solid model. That is reverse engineering.

Can this open a .step file?

No. A .step is a solid model, not a mesh, and this viewer shows .stl meshes only. A .step is what a machine shop wants, and it can be saved as an .stl in seconds.

Why are the sizes shown in millimetres?

An .stl file does not say what units it is in. Most are millimetres, so the viewer shows millimetres and also the same numbers divided into inches. If your file was saved in inches, read the millimetre line as inches.