Scanning Pros
Scanning Pros › Turbo Engineering Systems CAD

Turbo Engineering Systems CAD Build a part from simple shapes. Save it as an .stl.

Put boxes, cylinders and other shapes on the work plane, size them in millimetres, turn some into holes, and group them into one part. Then try the challenges: the page measures your part and tells you if it is right. Your design stays on your computer. We keep a record of each use of this page.

Add a shape:
Handles:

Loading the CAD page...

Drag the picture to turn the view. Scroll or pinch to zoom. Right-drag, or two fingers, to slide. Each square on the work plane is 10 mm. The red line points right, the green line points to the back.

On a keyboard: Delete removes the selected shape, Ctrl+Z is undo, Ctrl+Y is redo, Ctrl+D copies, and the arrow keys nudge it one step.

Saving puts the file in your own downloads folder. Nothing you build is uploaded.

How to build a part

  1. Add shapes. Each new shape lands on a free spot on the work plane, 20 mm each way, already selected. A selected shape has a yellow box round it.
  2. Select. Click a shape in the picture to select it. For more than one, press "Select all", or press "Pick several" and click each shape (holding Shift while you click does the same).
  3. Size and place it. Type millimetres in the boxes, or drag the coloured handles: Move, Turn or Size. Turning is always a quarter turn.
  4. Make holes. Select a shape and press Hole. It turns grey and see-through.
  5. Line up. With two or more shapes selected, "Line up centres" moves the others onto the middle of the first one.
  6. Group. Select the shapes that belong together and press Group. Solids are joined and holes are cut out of them, leaving one part. Ungroup takes it apart again.
  7. Save. "Save my .stl" writes the part as a mesh for a 3D printer. "Save my design" keeps the shapes so you can open and change them later.

The challenges

There are nine, from a plain block to an L-bracket with two holes. Pick one and a yellow outline of the goal appears on the work plane. Build your part anywhere, turned any way, and press "Check my part". The page measures its overall size, how much material it has and where that material is, and tells you whether it passed and, if not, what is off. Passed challenges are remembered by this browser.

What this is, and what it is not

This is a simple way to build a part from basic shapes and get a clean .stl. It is not a full CAD program: no sketches, fillets, threads or drawings, and round shapes are made of flat sides. Want to look at the .stl you saved? Open it in our free 3D viewer.

Have a real part that is worn, broken or has no drawing? Turning it into a clean solid model is reverse engineering, and it is what we do. Ask us a question or email a photo to lee@scanningpros.com.

We keep a record of each use of this page: the time, the internet address it came from, and what was done (page opened, challenge started or passed, design saved or opened, .stl saved and its size). What you build is not recorded and never leaves your computer.

Questions people ask

Is my design uploaded?

No. Your design is built by your own browser and stays on your computer. Saving puts a file in your own downloads folder. We record that the page was used, with the time, your internet address and what was done (for example which challenge was passed, or that an .stl was saved), but not the design.

My hole did not cut. Why?

A hole only cuts when it is grouped with a solid. Select the hole and the solid together, then press Group. Ungroup brings both back.

What units does it use?

Millimetres, with inches shown beside every number. The .stl it saves is in millimetres, which is what 3D printing slicers expect.

Can I 3D print what I make here?

Yes. "Save my .stl" writes a closed mesh in millimetres that a slicer can open. Round shapes are made of 64 flat sides. For a part that has to fit another part, check the sizes in your slicer before you print.

Can this make a .step file?

No. It builds with simple shapes and saves an .stl mesh. A .step (Solid Model) is what a machine shop wants, and that is the kind of file we make from your part or your drawing.