Scanning Pros
Scanning Pros › Reverse engineering services

Reverse engineering services From a real part to a CAD file you can make it from

Want to make it? We can scan it and reverse engineer it for you. You hand us a real part. We hand back a CAD file that's ready for your machine shop. Our specialty is restoring design intent: worn-out parts rebuilt back to original specs.

Send us a photo of your part

Customers ship parts to us from all over the USA.

Green color map comparing a CAD model of a casting to its scan

What reverse engineering is

Reverse engineering is making a CAD model, and a drawing if you need one, from a part that already exists. It is how you get a part made when the drawing is lost, the maker is gone, or the part was never drawn in the first place.

How we do it

  1. Scan. We 3D scan the real part, every surface of it.
  2. Model. We rebuild the part in CAD as a true solid: flat faces flat, round bores round, holes on their real pattern.
  3. Check. We lay the CAD model over the scan and color-map the difference, so you can see how closely the model matches the real part.
  4. You get the file. A CAD file ready for your machine shop.
Blue 3D scan of a curved cover ring on a computer screen
The scan of a cover ring
Reverse engineered CAD model of the same curved cover ring
The CAD model made from it

Side by side

The rougher part in each picture is the 3D scan of the real thing. The clean one is the solid model we built from it. See more of these in our work.

Cylinder head: the reverse engineered solid model beside the 3D scan
Cylinder head: reverse engineered model and 3D scan
Bracket: the rough 3D scan beside the clean solid model rebuilt from it
Bracket: the 3D scan, and the solid model rebuilt from it
Housing: the solid model beside the 3D scan of the real part
Housing: solid model beside the 3D scan

Our specialty: restoring design intent

Old parts are rarely perfect. They wear, they bend, and castings come out a little off. A plain copy of a worn part gives you a new worn part. We specialize in restoring design intent: taking a worn-out part and rebuilding it back to its original specs, the way it was meant to be made.

Flat faces go back to flat, bores back to round and on size, holes back on their true pattern. Odd, worn or one-of-a-kind threads are part of that; our free thread chart shows the standard ones.

Broken, with pieces missing? We can scan a broken part with pieces missing and put it back together again in CAD. What is missing gets rebuilt, so the model you get is the whole part.

Most of this work is done under non-disclosure agreements, so we can't show those projects here. We are used to working that way.

When people call us

  • You have a part you can't buy anymore.
  • The part is broken, or pieces of it are missing.
  • The drawing is lost, or there never was one.
  • A machine is down for a part its maker no longer supports.
  • You are restoring something old, like the 1957 392 Hemi water pump in our gallery.
  • You have a drawing but no 3D model. See drawings to 3D solid models.

Questions people ask

What do I get when you reverse engineer my part?

A solid CAD model of the part, checked against the 3D scan, as a CAD file that's ready for your machine shop. Tell us which CAD or CAM program your shop uses when you email.

My part is worn or broken. Can you still reverse engineer it?

Yes, that is our specialty. We restore design intent: the worn-out part is rebuilt back to its original specs, not copied with its wear. Email a photo so we can see what is left to work from.

My part is broken and pieces are missing. Can you still do it?

Yes. We can scan a broken part with pieces missing and put it back together again in CAD, rebuilding what is missing so you get the whole part.

Do you work under a non-disclosure agreement (NDA)?

Yes. Most of our design-intent work is done under NDA, which is why you will not see those projects shown on this site.

Do you need a drawing of the part?

No. The real part is enough, because we 3D scan it. If you do have a drawing, send it too.

Can you make the part as well?

We print parts in carbon fiber infused metal and in ultra high heat resistant plastic, from the CAD file or from our scan of your part. Need parts made another way? Email us your contact info.

How much does reverse engineering cost?

It depends on the part. It is not as expensive as you might think. Email a photo to lee@scanningpros.com and tell us what you need.

Do I have to be near you?

No. We are in Walterboro, South Carolina, and customers ship parts to us from all over the USA. Email a photo of your part to lee@scanningpros.com first. Once we have looked at the job, we tell you where to send it. Every package must have a return shipping label in the box, so we can send your part back to you. No exceptions.

Got a part you want to make?

Email a photo and tell us what you need.

lee@scanningpros.com Call 843-898-6065

Ask a question · When you call, leave your name, address and phone number if we are not in

W. L. Thomas, Owner · Scanning Pros · Walterboro, South Carolina
A team of four engineers · 47 years of experience in 3D scanning and reverse engineering · parts shipped to us from all over the USA