Scanning Pros
Scanning Pros › Our work

Our work 3D scans beside the solid models we built from them

We specialize in restoring design intent, taking worn-out and broken parts and rebuilding them back to original specs. Most of that work is done under non-disclosure agreements, so it is not shown here. These are jobs we can show.

Side by side: the scan and the solid model

In each picture, the rougher part is the 3D scan (.stl) of the real thing. The clean one is the .step (Solid Model) we reverse engineered from it: flat faces flat, round holes round, sizes exact. What is the difference between .step and .stl?

Cylinder head: reverse engineered model and 3D scan, from the Scanning Pros shop
Cylinder head: reverse engineered model and 3D scan
Bracket: the 3D scan, and the solid model rebuilt from it, from the Scanning Pros shop
Bracket: the 3D scan, and the solid model rebuilt from it
Housing: solid model beside the 3D scan, from the Scanning Pros shop
Housing: solid model beside the 3D scan
Flanged hub: solid model beside the 3D scan, from the Scanning Pros shop
Flanged hub: solid model beside the 3D scan
Housing: modified model, original .step and 3D scan, from the Scanning Pros shop
Housing: modified model, original .step and 3D scan
Keyed collar: 3D scan beside the solid model, from the Scanning Pros shop
Keyed collar: 3D scan beside the solid model
Crankshaft: 3D scan and solid model, from the Scanning Pros shop
Crankshaft: 3D scan and solid model
Three-lobe hub: solid model and 3D scan, from the Scanning Pros shop
Three-lobe hub: solid model and 3D scan
Scoop: solid model beside the 3D scan, from the Scanning Pros shop
Scoop: solid model beside the 3D scan
Machined body: solid model beside the 3D scan, from the Scanning Pros shop
Machined body: solid model beside the 3D scan
Drilled plate: solid model beside the 3D scan, from the Scanning Pros shop
Drilled plate: solid model beside the 3D scan
Plate marked IN and OUT: 3D scan beside the solid model, from the Scanning Pros shop
Plate marked IN and OUT: 3D scan beside the solid model
Bolt ring: solid model beside the 3D scan, from the Scanning Pros shop
Bolt ring: solid model beside the 3D scan
Slotted plate: solid model beside the 3D scan, from the Scanning Pros shop
Slotted plate: solid model beside the 3D scan

More solid models

Engine parts, housings, gears, brackets and fittings, each a .step (Solid Model) file.

Air-cooled engine cylinder, from the Scanning Pros shop
Air-cooled engine cylinder
Cast housing, from the Scanning Pros shop
Cast housing
Ribbed cover casting, from the Scanning Pros shop
Ribbed cover casting
Four-port manifold housing, from the Scanning Pros shop
Four-port manifold housing
Ring gear, from the Scanning Pros shop
Ring gear
Sprocket carrier, from the Scanning Pros shop
Sprocket carrier
Sprocket, from the Scanning Pros shop
Sprocket
Gear segment and clamp, from the Scanning Pros shop
Gear segment and clamp
Finned engine cylinder, from the Scanning Pros shop
Finned engine cylinder
Ribbed housing, from the Scanning Pros shop
Ribbed housing
Cast housing with cover, from the Scanning Pros shop
Cast housing with cover
Vented cover, from the Scanning Pros shop
Vented cover
Cover ring, from the Scanning Pros shop
Cover ring
Twin-cylinder gasket, from the Scanning Pros shop
Twin-cylinder gasket
Rail with fittings, from the Scanning Pros shop
Rail with fittings
Twin-bore housing, from the Scanning Pros shop
Twin-bore housing
Cast cover, from the Scanning Pros shop
Cast cover
Threaded body, from the Scanning Pros shop
Threaded body
Splined cup, from the Scanning Pros shop
Splined cup
Flanged elbow, from the Scanning Pros shop
Flanged elbow
Bolted housing assembly, from the Scanning Pros shop
Bolted housing assembly
Twin-bore clamp, from the Scanning Pros shop
Twin-bore clamp
Slotted mounting block, from the Scanning Pros shop
Slotted mounting block
Mounting bracket, from the Scanning Pros shop
Mounting bracket
Threaded cap, from the Scanning Pros shop
Threaded cap

Got a part you want to make?

Email a photo and tell us what you need. Parts are shipped to us from all over the USA.

lee@scanningpros.com Call 843-898-6065

Ask a question · When you call, leave your name, address and phone number if we are not in

W. L. Thomas, Owner · Scanning Pros · Walterboro, South Carolina
A team of four engineers · 47 years of experience in 3D scanning and reverse engineering