Scanning Pros
Scanning Pros › First article inspection

First article inspection Your first part checked, with documentation

Before you run the whole batch, find out if the first part is right. We run first article inspections with documentation.

Send us a photo of your part

Customers ship parts to us from all over the USA.

Green color map comparing a CAD model of a casting to the 3D scan of the real part

What a first article inspection is

A first article inspection is a full check of the first part off a new job, a new setup or a new supplier, before the rest are made. The part is compared with its CAD model or drawing, and what is found is written down. If something is off, you find out after one part and not after a thousand.

How we do it

  1. You send the first part and its CAD model or drawing. Email first, and we tell you where to ship it.
  2. We 3D scan the part, every surface of it. See 3D scanning.
  3. We compare the scan with the CAD model. The difference shows as a color map over the whole part, so nothing hides between the few spots a caliper would have touched.
  4. You get the documentation.

Only have a drawing and no CAD model? We convert the drawing into a 3D solid model first and check the part against that.

What the documentation is for

It is your record that the part was checked and what was found. Keep it with the job, send it to your customer, or hand it to the shop that made the part so they know exactly what to correct.

When to ask for one

  • The first parts from a new supplier or a new machine shop.
  • The first part from a new mold, casting pattern, fixture or program.
  • A part made from a model we reverse engineered, to prove the new part matches.
  • Before a production run, when a mistake gets expensive fast.

Questions people ask

What do I send for a first article inspection?

The first part and its CAD model or drawing. If you only have a drawing, we can convert it into a 3D solid model first. Email lee@scanningpros.com before you ship anything.

What documentation do I get?

A record of the inspection for your files, with a color map that shows where the part matches its CAD model and where it does not.

Can you inspect a part made from a model you reverse engineered?

Yes. We 3D scan the new part and check it against the CAD model, the same way we check the model against the scan of the original.

How much does a first article inspection cost?

It depends on the part. Email a photo and the drawing or CAD model to lee@scanningpros.com for a price.

Do I have to be near you?

No. We are in Walterboro, South Carolina, and customers ship parts to us from all over the USA. Email a photo of your part to lee@scanningpros.com first. Once we have looked at the job, we tell you where to send it. Every package must have a return shipping label in the box, so we can send your part back to you. No exceptions.

Got a part you want to make?

Email a photo and tell us what you need.

lee@scanningpros.com Call 843-898-6065

Ask a question · When you call, leave your name, address and phone number if we are not in

W. L. Thomas, Owner · Scanning Pros · Walterboro, South Carolina
A team of four engineers · 47 years of experience in 3D scanning and reverse engineering · parts shipped to us from all over the USA