Scanning Pros

Scanning Pros › Free thread chart › UNC › #3-48 UNC

#3-48 UNC thread Tap drill, dimensions and a free 3D model

#3-48 UNC (also written No. 3-48 UNC) is a Unified National Coarse (UNC) inch thread, the everyday inch bolt thread. It has a 0.0990 in (2.515 mm) major diameter and 48 threads per inch, a pitch of 0.02083 in. The tap drill is #47 (0.0785 in), which leaves about 76% thread.

#3-48 UNC thread dimensions
Major diameter (in)0.0990
Major diameter (mm)2.515
Threads per inch (TPI)48
Pitch (in)0.02083
Basic minor diameter (in)0.0764
Tap drill#47
Tap drill diameter (in)0.0785
Thread left by that tap drill76%

Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ASME B1.1 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for #3-48 UNC?

#47 (0.0785 in). It leaves about 76% thread; 60 to 80% is normal.

What is the major diameter of #3-48 UNC?

0.0990 in, which is 2.515 mm.

How many threads per inch is #3-48 UNC?

48 threads per inch. The pitch, the distance from one thread to the next, is 0.02083 in.

Is there a free 3D model of the #3-48 UNC thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size #3-48 UNC threaded rod downloads as a STEP file for your CAD program.

Other sizes

Same diameter, other pitches: #3-56 UNF

Next sizes in UNC: #2-56 UNC#4-40 UNCAll UNC sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.