Scanning Pros

Scanning Pros › Free thread chart › UNC › #2-56 UNC

#2-56 UNC thread Tap drill, dimensions and a free 3D model

#2-56 UNC (also written No. 2-56 UNC) is a Unified National Coarse (UNC) inch thread, the everyday inch bolt thread. It has a 0.0860 in (2.184 mm) major diameter and 56 threads per inch, a pitch of 0.01786 in. The tap drill is #50 (0.0700 in), which leaves about 69% thread.

#2-56 UNC thread dimensions
Major diameter (in)0.0860
Major diameter (mm)2.184
Threads per inch (TPI)56
Pitch (in)0.01786
Basic minor diameter (in)0.0667
Tap drill#50
Tap drill diameter (in)0.0700
Thread left by that tap drill69%

Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ASME B1.1 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for #2-56 UNC?

#50 (0.0700 in). It leaves about 69% thread; 60 to 80% is normal.

What is the major diameter of #2-56 UNC?

0.0860 in, which is 2.184 mm.

How many threads per inch is #2-56 UNC?

56 threads per inch. The pitch, the distance from one thread to the next, is 0.01786 in.

Is there a free 3D model of the #2-56 UNC thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size #2-56 UNC threaded rod downloads as a STEP file for your CAD program.

Other sizes

Same diameter, other pitches: #2-64 UNF

Next sizes in UNC: #1-64 UNC#3-48 UNCAll UNC sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.