Scanning Pros › Free thread chart › Metric coarse › M5x0.8
M5x0.8 thread Tap drill, dimensions and a free 3D model
M5x0.8 is an ISO metric coarse thread, the standard metric bolt thread. It has a 5 mm (0.1969 in) major diameter and a 0.8 mm pitch, the same as 31.75 threads per inch. The tap drill is 4.2 mm, which leaves about 77% thread.
| Major diameter (mm) | 5 |
|---|---|
| Major diameter (in) | 0.1969 |
| Pitch (mm) | 0.8 |
| Threads per inch (equivalent) | 31.75 |
| Basic minor diameter (mm) | 4.134 |
| Tap drill (mm) | 4.2 |
| Thread left by that tap drill | 77% |
Metric tap drill = major diameter minus pitch. Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ISO 261 and ISO 724 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.
Questions people ask
What size tap drill for M5x0.8?
4.2 mm. Metric tap drill is the major diameter minus the pitch. It leaves about 77% thread.
What is the pitch of M5x0.8?
0.8 mm from one thread to the next, the same as 31.75 threads per inch.
What is the major diameter of M5x0.8 in inches?
5 mm is 0.1969 in.
Is there a free 3D model of the M5x0.8 thread?
Yes. Click the Free STEP model button on this page, enter your email, and a true-size M5x0.8 threaded rod downloads as a STEP file for your CAD program.
Other sizes
Next sizes in Metric coarse: M4x0.7M6x1All Metric coarse sizesThe whole thread chart
Need a thread that isn't standard?
Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.
See how we reverse engineer parts