Scanning Pros

Scanning Pros › Free thread chart › Metric coarse › M4x0.7

M4x0.7 thread Tap drill, dimensions and a free 3D model

M4x0.7 is an ISO metric coarse thread, the standard metric bolt thread. It has a 4 mm (0.1575 in) major diameter and a 0.7 mm pitch, the same as 36.29 threads per inch. The tap drill is 3.3 mm, which leaves about 77% thread.

M4x0.7 thread dimensions
Major diameter (mm)4
Major diameter (in)0.1575
Pitch (mm)0.7
Threads per inch (equivalent)36.29
Basic minor diameter (mm)3.242
Tap drill (mm)3.3
Thread left by that tap drill77%

Metric tap drill = major diameter minus pitch. Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ISO 261 and ISO 724 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for M4x0.7?

3.3 mm. Metric tap drill is the major diameter minus the pitch. It leaves about 77% thread.

What is the pitch of M4x0.7?

0.7 mm from one thread to the next, the same as 36.29 threads per inch.

What is the major diameter of M4x0.7 in inches?

4 mm is 0.1575 in.

Is there a free 3D model of the M4x0.7 thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size M4x0.7 threaded rod downloads as a STEP file for your CAD program.

Other sizes

Next sizes in Metric coarse: M3.5x0.6M5x0.8All Metric coarse sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.