Scanning Pros

Scanning Pros › Free thread chart › Metric coarse › M2x0.4

M2x0.4 thread Tap drill, dimensions and a free 3D model

M2x0.4 is an ISO metric coarse thread, the standard metric bolt thread. It has a 2 mm (0.0787 in) major diameter and a 0.4 mm pitch, the same as 63.50 threads per inch. The tap drill is 1.6 mm, which leaves about 77% thread.

M2x0.4 thread dimensions
Major diameter (mm)2
Major diameter (in)0.0787
Pitch (mm)0.4
Threads per inch (equivalent)63.50
Basic minor diameter (mm)1.567
Tap drill (mm)1.6
Thread left by that tap drill77%

Metric tap drill = major diameter minus pitch. Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ISO 261 and ISO 724 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for M2x0.4?

1.6 mm. Metric tap drill is the major diameter minus the pitch. It leaves about 77% thread.

What is the pitch of M2x0.4?

0.4 mm from one thread to the next, the same as 63.50 threads per inch.

What is the major diameter of M2x0.4 in inches?

2 mm is 0.0787 in.

Is there a free 3D model of the M2x0.4 thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size M2x0.4 threaded rod downloads as a STEP file for your CAD program.

Other sizes

Next sizes in Metric coarse: M1.6x0.35M2.5x0.45All Metric coarse sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.