Scanning Pros

Scanning Pros › Free thread chart › Metric coarse › M2.5x0.45

M2.5x0.45 thread Tap drill, dimensions and a free 3D model

M2.5x0.45 is an ISO metric coarse thread, the standard metric bolt thread. It has a 2.5 mm (0.0984 in) major diameter and a 0.45 mm pitch, the same as 56.44 threads per inch. The tap drill is 2.05 mm, which leaves about 77% thread.

M2.5x0.45 thread dimensions
Major diameter (mm)2.5
Major diameter (in)0.0984
Pitch (mm)0.45
Threads per inch (equivalent)56.44
Basic minor diameter (mm)2.013
Tap drill (mm)2.05
Thread left by that tap drill77%

Metric tap drill = major diameter minus pitch. Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ISO 261 and ISO 724 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for M2.5x0.45?

2.05 mm. Metric tap drill is the major diameter minus the pitch. It leaves about 77% thread.

What is the pitch of M2.5x0.45?

0.45 mm from one thread to the next, the same as 56.44 threads per inch.

What is the major diameter of M2.5x0.45 in inches?

2.5 mm is 0.0984 in.

Is there a free 3D model of the M2.5x0.45 thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size M2.5x0.45 threaded rod downloads as a STEP file for your CAD program.

Other sizes

Next sizes in Metric coarse: M2x0.4M3x0.5All Metric coarse sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.