Scanning Pros

Scanning Pros › Free thread chart › Metric coarse › M42x4.5

M42x4.5 thread Tap drill, dimensions and a free 3D model

M42x4.5 is an ISO metric coarse thread, the standard metric bolt thread. It has a 42 mm (1.6535 in) major diameter and a 4.5 mm pitch, the same as 5.64 threads per inch. The tap drill is 37.5 mm, which leaves about 77% thread.

M42x4.5 thread dimensions
Major diameter (mm)42
Major diameter (in)1.6535
Pitch (mm)4.5
Threads per inch (equivalent)5.64
Basic minor diameter (mm)37.129
Tap drill (mm)37.5
Thread left by that tap drill77%

Metric tap drill = major diameter minus pitch. Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ISO 261 and ISO 724 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for M42x4.5?

37.5 mm. Metric tap drill is the major diameter minus the pitch. It leaves about 77% thread.

What is the pitch of M42x4.5?

4.5 mm from one thread to the next, the same as 5.64 threads per inch.

What is the major diameter of M42x4.5 in inches?

42 mm is 1.6535 in.

Is there a free 3D model of the M42x4.5 thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size M42x4.5 threaded rod downloads as a STEP file for your CAD program.

Other sizes

Same diameter, other pitches: M42x3

Next sizes in Metric coarse: M36x4M48x5All Metric coarse sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.