Scanning Pros

Scanning Pros › Free thread chart › Metric fine › M27x2

M27x2 thread Tap drill, dimensions and a free 3D model

M27x2 is an ISO metric fine pitch thread. It has a 27 mm (1.0630 in) major diameter and a 2 mm pitch, the same as 12.70 threads per inch. The tap drill is 25 mm, which leaves about 77% thread.

M27x2 thread dimensions
Major diameter (mm)27
Major diameter (in)1.0630
Pitch (mm)2
Threads per inch (equivalent)12.70
Basic minor diameter (mm)24.835
Tap drill (mm)25
Thread left by that tap drill77%

Metric tap drill = major diameter minus pitch. Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ISO 261 and ISO 724 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for M27x2?

25 mm. Metric tap drill is the major diameter minus the pitch. It leaves about 77% thread.

What is the pitch of M27x2?

2 mm from one thread to the next, the same as 12.70 threads per inch.

What is the major diameter of M27x2 in inches?

27 mm is 1.0630 in.

Is there a free 3D model of the M27x2 thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size M27x2 threaded rod downloads as a STEP file for your CAD program.

Other sizes

Same diameter, other pitches: M27x3

Next sizes in Metric fine: M24x2M30x2All Metric fine sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.