Scanning Pros › Free thread chart › Metric fine › M10x1.25
M10x1.25 thread Tap drill, dimensions and a free 3D model
M10x1.25 is an ISO metric fine pitch thread. It has a 10 mm (0.3937 in) major diameter and a 1.25 mm pitch, the same as 20.32 threads per inch. The tap drill is 8.75 mm, which leaves about 77% thread.
| Major diameter (mm) | 10 |
|---|---|
| Major diameter (in) | 0.3937 |
| Pitch (mm) | 1.25 |
| Threads per inch (equivalent) | 20.32 |
| Basic minor diameter (mm) | 8.647 |
| Tap drill (mm) | 8.75 |
| Thread left by that tap drill | 77% |
Metric tap drill = major diameter minus pitch. Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ISO 261 and ISO 724 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.
Questions people ask
What size tap drill for M10x1.25?
8.75 mm. Metric tap drill is the major diameter minus the pitch. It leaves about 77% thread.
What is the pitch of M10x1.25?
1.25 mm from one thread to the next, the same as 20.32 threads per inch.
What is the major diameter of M10x1.25 in inches?
10 mm is 0.3937 in.
Is there a free 3D model of the M10x1.25 thread?
Yes. Click the Free STEP model button on this page, enter your email, and a true-size M10x1.25 threaded rod downloads as a STEP file for your CAD program.
Other sizes
Same diameter, other pitches: M10x1.5M10x1
Next sizes in Metric fine: M8x1M10x1All Metric fine sizesThe whole thread chart
Need a thread that isn't standard?
Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.
See how we reverse engineer parts