Scanning Pros

Scanning Pros › Free thread chart › UNEF › 3/4-20 UNEF

3/4-20 UNEF thread Tap drill, dimensions and a free 3D model

3/4-20 UNEF is a Unified National Extra Fine (UNEF) inch thread, for thin-wall parts. It has a 0.7500 in (19.050 mm) major diameter and 20 threads per inch, a pitch of 0.05000 in. The tap drill is 45/64 (0.7031 in), which leaves about 72% thread.

3/4-20 UNEF thread dimensions
Major diameter (in)0.7500
Major diameter (mm)19.050
Threads per inch (TPI)20
Pitch (in)0.05000
Basic minor diameter (in)0.6959
Tap drill45/64
Tap drill diameter (in)0.7031
Thread left by that tap drill72%

Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ASME B1.1 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for 3/4-20 UNEF?

45/64 (0.7031 in). It leaves about 72% thread; 60 to 80% is normal.

What is the major diameter of 3/4-20 UNEF?

0.7500 in, which is 19.050 mm.

How many threads per inch is 3/4-20 UNEF?

20 threads per inch. The pitch, the distance from one thread to the next, is 0.05000 in.

Is there a free 3D model of the 3/4-20 UNEF thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size 3/4-20 UNEF threaded rod downloads as a STEP file for your CAD program.

Other sizes

Same diameter, other pitches: 3/4-10 UNC3/4-16 UNF

Next sizes in UNEF: 11/16-24 UNEF13/16-20 UNEFAll UNEF sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.