Scanning Pros

Scanning Pros › Free thread chart › UNC › 1-8 UNC

1-8 UNC thread Tap drill, dimensions and a free 3D model

1-8 UNC is a Unified National Coarse (UNC) inch thread, the everyday inch bolt thread. It has a 1.0000 in (25.400 mm) major diameter and 8 threads per inch, a pitch of 0.12500 in. The tap drill is 7/8 (0.8750 in), which leaves about 77% thread.

1-8 UNC thread dimensions
Major diameter (in)1.0000
Major diameter (mm)25.400
Threads per inch (TPI)8
Pitch (in)0.12500
Basic minor diameter (in)0.8647
Tap drill7/8
Tap drill diameter (in)0.8750
Thread left by that tap drill77%

Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ASME B1.1 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for 1-8 UNC?

7/8 (0.8750 in). It leaves about 77% thread; 60 to 80% is normal.

What is the major diameter of 1-8 UNC?

1.0000 in, which is 25.400 mm.

How many threads per inch is 1-8 UNC?

8 threads per inch. The pitch, the distance from one thread to the next, is 0.12500 in.

Is there a free 3D model of the 1-8 UNC thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size 1-8 UNC threaded rod downloads as a STEP file for your CAD program.

Other sizes

Same diameter, other pitches: 1-12 UNF1-20 UNEF

Next sizes in UNC: 7/8-9 UNC1-1/8-7 UNCAll UNC sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.