Scanning Pros › Free thread chart › UNF › 1/4-28 UNF
1/4-28 UNF thread Tap drill, dimensions and a free 3D model
1/4-28 UNF is a Unified National Fine (UNF) inch thread, with more threads per inch for thin walls and fine adjustment. It has a 0.2500 in (6.350 mm) major diameter and 28 threads per inch, a pitch of 0.03571 in. The tap drill is #3 (0.2130 in), which leaves about 80% thread.
| Major diameter (in) | 0.2500 |
|---|---|
| Major diameter (mm) | 6.350 |
| Threads per inch (TPI) | 28 |
| Pitch (in) | 0.03571 |
| Basic minor diameter (in) | 0.2113 |
| Tap drill | #3 |
| Tap drill diameter (in) | 0.2130 |
| Thread left by that tap drill | 80% |
Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ASME B1.1 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.
Questions people ask
What size tap drill for 1/4-28 UNF?
#3 (0.2130 in). It leaves about 80% thread; 60 to 80% is normal.
What is the major diameter of 1/4-28 UNF?
0.2500 in, which is 6.350 mm.
How many threads per inch is 1/4-28 UNF?
28 threads per inch. The pitch, the distance from one thread to the next, is 0.03571 in.
Is there a free 3D model of the 1/4-28 UNF thread?
Yes. Click the Free STEP model button on this page, enter your email, and a true-size 1/4-28 UNF threaded rod downloads as a STEP file for your CAD program.
Other sizes
Same diameter, other pitches: 1/4-20 UNC1/4-32 UNEF
Next sizes in UNF: #12-28 UNF5/16-24 UNFAll UNF sizesThe whole thread chart
Need a thread that isn't standard?
Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.
See how we reverse engineer parts