Scanning Pros

Scanning Pros › Free thread chart › UNC › 1/2-13 UNC

1/2-13 UNC thread Tap drill, dimensions and a free 3D model

1/2-13 UNC is a Unified National Coarse (UNC) inch thread, the everyday inch bolt thread. It has a 0.5000 in (12.700 mm) major diameter and 13 threads per inch, a pitch of 0.07692 in. The tap drill is 27/64 (0.4219 in), which leaves about 78% thread.

1/2-13 UNC thread dimensions
Major diameter (in)0.5000
Major diameter (mm)12.700
Threads per inch (TPI)13
Pitch (in)0.07692
Basic minor diameter (in)0.4167
Tap drill27/64
Tap drill diameter (in)0.4219
Thread left by that tap drill78%

Thread % is how deep a thread the tap drill leaves (Machinery's Handbook rule); 60 to 80% is normal. Checked against the ASME B1.1 standard. The free 3D model is a true-size threaded rod in millimetres: subtract it from a hole drilled at the tap drill size to make a threaded hole, or add it as a stud. Always confirm a size on the real part with a thread gauge.

Questions people ask

What size tap drill for 1/2-13 UNC?

27/64 (0.4219 in). It leaves about 78% thread; 60 to 80% is normal.

What is the major diameter of 1/2-13 UNC?

0.5000 in, which is 12.700 mm.

How many threads per inch is 1/2-13 UNC?

13 threads per inch. The pitch, the distance from one thread to the next, is 0.07692 in.

Is there a free 3D model of the 1/2-13 UNC thread?

Yes. Click the Free STEP model button on this page, enter your email, and a true-size 1/2-13 UNC threaded rod downloads as a STEP file for your CAD program.

Other sizes

Same diameter, other pitches: 1/2-20 UNF1/2-28 UNEF

Next sizes in UNC: 7/16-14 UNC9/16-12 UNCAll UNC sizesThe whole thread chart

Need a thread that isn't standard?

Odd, worn or one-of-a-kind threads and parts: we 3D scan them and draw them in CAD.

See how we reverse engineer parts

Free 3D model:

Enter your email and the STEP file downloads right away. One model each time.

Scanning Pros may email you about 3D scanning and CAD services. We never sell your email.